Although our masks are unique and will have many looking at you, they will never suspect that it's also a lamp. This new function just made our masks more unique. It's simple white design makes it easy to wear in any type of work environment. You can enjoy the overall form and function of the mask without the distraction of colors.
The lighting component is intricately looped around an internal 3D printed part to hold it all together. They are LED copper wires powered by 2 included Cr2032 batteries. It should last up to 48 hours. The electrical components are IP65 waterproof and can be used indoor/outdoor without the worry of moisture damage or short circuit. It's made with a covering that prevents your lips from touching the components. (When the electrical components gets wet, it's common for the LED to glow for an amount of time until the water is evaporated.)
If you want the new Polyhedral filter design for your mask, don't forget to include the Polyhedral Filter Base along with a selected Polyhedral Filter Cover. It will be installed for your convenience and your current Square Filter Base/Cover will NOT be included. Individual parts can be ordered and added as accessories.
The mask is made of 100% waterproof paper made from TerraSlate. Our masks are both functional and designed as a new form of art. In the our theme of origami, we have found a way to fold a face mask from a single sheet of plastic. It is specifically folded inward for comfort when putting it on. One of its' unique features is the ability to collect face moisture on the internal surfaces. You don't have to worry about your face touching your own moisture. Just clean it and wear it right away. Fabric face masks has to be dried for an amount of time after being washed, but ours can be worn shortly after.
2 non-woven needle punched 90% cotton fabric filter material is included for your convenience. A unique process has been created to make breathing easier and as safe as it can be without risking your safety in order to breathe. We have found a cotton non-woven fabric that is similar to what N95 masks uses, and applied it as an opening valve. This made it easier to breath out your carbon monoxide, while filtering in new oxygen through the fabric valve. Filters are designed like a maze. Therefore we made it where new air comes from the front, allowing old air out onto the front side of the mask.
This pre-built mask is pre-folded and assembled by me, the owner of Incredifold LLC. Sanitize it daily with rubbing alcohol or other sanitizing solutions before use.
LEGAL DISCLAIMER - USE AT YOUR OWN RISK.
These face masks should NOT be used as replacements for conventional and approved Personal Protective Equipment (“PPE”). Unless otherwise noted, these face masks have not been industry tested, have not been NIOSH approved, have not been otherwise certified to provide any level of personal protection, and have not been FDA cleared.
IN NO EVENT SHALL INCREDIFOLD LLC BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THESE FACE MASKS, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
YOU SHALL HOLD HARMLESS AND INDEMNIFY INCREDIFOLD LLC AGAINST ANY AND ALL CLAIMS BROUGHT AGAINST INCREDIFOLD LLC ARISING FROM YOUR PURCHASE AND USE OF THESE FACE MASKS.